| * |
Make sure all three-wire tools and appliances with flexible
cords are properly grounded. |
| * |
Guard live parts of electrical equipment against accidental contact. |
| * |
Identify the circuits served by the fuses, circuit breakers or disconnect
switches and record them in the panel board directory. |
| * |
Protect flexible cords and cables from physical damage. |
| * |
Ground exposed parts of fixed equipment that could be energized. |
| * |
Make sure all ground paths from equipment and enclosures are permanent
and continuous. |
| * |
Keep slack in flexible cords to prevent tension on terminals. |
| * |
Make sure the insulating qualities of splice are equal to or greater
than the original cord. |
| * |
Make certain that there are no obstructions limiting air circulation
near equipment ventilating openings. |
| * |
Locate overcurrent protective devices (i.e., circuit breakers or
fuses) where they can be easily and quickly reached. |
